Replacement

• When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • Put on gloves to protect your hands.

1.	Remove the knob (A).

2.	Using a screwdriver, remove the floor console tray (A).

3.	Using a screwdriver, remove the floor console bezel (A).

4.	Disconnect the connectors (B).

5.	Using a screwdriver, remove the console upper cover (A).

6.	Disconnect the connector (B).

7.	Remove the console tray mat (A).

8.	Remove the extension side cover (A).

9.	After loosening the mounting bolts and screws, then remove the floor console assembly (A).

10.	Installation is the reverse of removal. • Make sure the connector is plugged in properly. • Replace any damage clips.